Inline Extension Pole Clamp

£99.00

Machined from 7075-T6 aluminium and anodised black, our inline extension pole clamps were designed to be used in combination with our adjustable angled riser. The 42mm fore-aft spacing matches the outer hole fore-aft of the adjustable riser whilst the profiling was designed to match the profile of the riser for seamless integration.

The pole clamp design also allows for up to 5 degrees of toe in angle adjustment so you can refine your handgrip tip centres.

PLEASE NOTE THESE CLAMPS CAN ONLY BE USED IN COMBINATION WITH THE ADJUSTABLE ANGLED RISERS, THEY CAN NOT BE USED AS A STANDALONE COMPONENT.

VIEW INSTALL GUIDE

    Product Description

    A standard pole clamp can be very limiting to your set up for a number of reasons; your extension poles may need to be trimmed in order to shorten the reach (meaning you can't extend back out), the clamp my offer an awkward arm rest mounting (Bianchi Aquila for example), the clamp may not be the industry standard 22.2mm, or the clamp may prevent you from angling your poles in line with your arm rests.

    If you have optimal lateral riser stack centres (usually in the region of 100-110mm) you may not want to offset your extension poles inboard or outboard of your stack, therefore keeping the poles inline with the stack would be optimal. Paired with our adjustable riser you will have a system that provides micro angle adjustment for both your extension poles and armrests whilst keeping everything in line with your stack.

    When compared to a standard cockpit set up, pairing the inline clamps with the adjustable riser will allow you to bring your extension poles closer to your forearm. Helping to reduce aerodynamic drag by closing the turbulent and lossy gap between your forearm and extension.

    Technical Specifications

    The inline pole clamp adds 30mm of stack height.

    WEIGHT

    - 162g (pair)

    HARDWARE

    - 2x M5x25mm low cap head
    - 2x M5x35mm low cap head
    - 4x M5x25mm countersunk head