Anemoi extension handgrips are available in a variety of different styles.
Manufactured in the UK by carbon filled selective laser sintering (SLS) to ensure the strongest lightweight construction.
STANDARD POLE
- 50mm long
- 50 degrees to the horizontal
- 7.5 degree toe in
- Inboard offset on the extension body
- 22.2mm ndustry standard pole to accept all mechanical and electronic shifter models
- UCI 10cm rule compliant when combined with a 15 degree or less riser angle
Please note if you install a shifter you will need cut your hand grip length down and check that you still comply with UCI 10cm rule legality.
ERGO (TRACK)
- 50mm long
- 50 degrees to the horizontal
- 7.5 degree toe in
- Grip profiled to increase hand contact area without forcing unnatural finger grips
- UCI 10cm rule compliant when combined with a 15 degree or less riser angle
ERGO (SRAM ETAP DOUBLE BLIP)
- 50mm long
- 50 degrees to the horizontal
- 7.5 degree toe in
- Grip profiled to increase hand contact area without forcing unnatural finger grips
- Accepts SRAM eTap blips within the grip
- Dual blips in LH grip
- UCI 10cm rule compliant when combined with a 15 degree or less riser angle
ERGO (SRAM ETAP SINGLE BLIP)
- 50mm long
- 50 degrees to the horizontal
- 7.5 degree toe in
- Grip profiled to increase hand contact area without forcing unnatural finger grips
- Accepts SRAM eTap blips within the grip
- Single blip in each grip
- UCI 10cm rule compliant when combined with a 15 degree or less riser angle
ERGO (SHIMANO DI2 SW_R9150 SATELLITE SHIFTER)
- 50mm long
- 50 degrees to the horizontal
- 7.5 degree toe in
- Grip profiled to increase hand contact area without forcing unnatural finger grips
- Accepts Shimano Di2 satellite shifter (R9150) within the grips
- Single shifter in each grip
- UCI 10cm rule compliant when combined with a 15 degree or less riser angle
WEIGHT
- Standard pole: 32g (pair)
- Ergo (track): 103g (pair)
- Ergo (SRAM double blip): 97g (pair)
- Ergo (SRAM single blip):
- Ergo (Shimano Di2 satellite shifter):
CUSTOM
Custom handgrips can be manufactured at an additional cost. Please get in touch if you wish to explore these options - info@shopforwatts.co.uk
