Anemoi Notio Bracket
An out front bracket for Notio or GoPro mounting that is compatible with our Anemoi extension system and can also be used as part of a standard dual riser stack with fore-aft bolt centres between 15-40mm.
The bracket adds 5mm in stack height when fitted as part of the riser stack, is machined from 6082-T6 aluminium and anodised black. It comes supplied with a Notio/GoPro mounting, 2x 5mm riser stack spacers and relevant hardware.If installed as part of the Anemoi extension system there are various mounting positions, these are outlined as below.
- As part of the extension riser stack between the mount plate and the angled riser, for dual riser stack and non-UCI mono riser stack systems. A pair of 5mm risers are supplied so as the opposite stack can be balanced with a 5mm spacer.
- To the underside of the mount plate positioned directly below angled riser, dual riser stack systems only.
- To the topside of the mount plate positioned directly above the riser stack, dual riser stack systems only.
Alternatively if installed as part of a standard dual riser stack system the bracket will mount as part of your riser stack. You'll need to balance the 5mm bracket out with a 5mm OEM spacer in the opposite riser stack. We recommend swapping out the bracket for a 5mm spacer when not testing.
Please note if you have a UCI legal mono bracket you may need to get in touch with us email@example.com to confirm compatibility.
- 28g (excluding any riser spacers)